Vanner RE Series Manuel d'installation Page 20

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 92
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 19
Installation And Start-Up
3-15
Copyright
2001 Phone: (614) 771-2718 RE-4500
Vanner Inc. FAX: 614-771-4904 Owners Manual
4282 Reynolds Dr. www.vanner.com Rev 01e
Hilliard Ohio 43026 RE-Installation_Manual_Rev01e 910157-A
INCORPORATED
INCORPORATEDINCORPORATED
INCORPORATED
Warning
This terminal is grounded to the Inverter Chassis.
Check Polarity Carefully! Attaching the Positive supply to this
terminal can result in loss of life, damage to the system, the
batteries, and voiding of Warranty.
Check your terminations carefully!
(24) Serial Control Connection
This RJ-11 jack is for serial communication between the RE-
4500 and another computer/controller. This jack can be used
for interface to the optional Vanner RE-ICC (Inverter Charger
Controller) – Vanner Part RE-ICC. Alternately, if the user
wishes to control and monitor the RE via another computer
running the Windows RE-ICC for Windows, the optional
Vanner RE Communications Interface Cable will attach to this
port.
Warning
This connector is for the Serial Controller Only (such as the RE-
ICC or RE Interface Cable)!
Attaching any other device to this connector can result in loss of
life, damage to the system, and voiding of the manufacturers
Warranty.
Check your terminations carefully!
(25) AC Generator Control Connector
This port is utilized to command multiple RE Components in a
system. It functions to communicate with the ACM to control
the Generator. It utilizes the MultiUnit Command and Control
Cable.
(26) AC Output
Connect 120/240 volt single phase load L1, L2, N, GND to AC
output terminals using 10 gauge wire minimum.
(27) AC Input
Connect a 240 V
rms
Three wire source L1, L2, N, and GND to
the AC input terminals using 10 gauge wire minimum.
Vue de la page 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 91 92

Commentaires sur ces manuels

Pas de commentaire